Users Guide

detail (OPTIONAL) Enter the keyword detail to display the IGMPv3
source information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000, and
Z9500.
Usage Information This command displays the IGMP database, including configured entries for either all
groups on all interfaces, all groups on specific interfaces, or specific groups on specific
interfaces.
The following describes the show ip igmp groups command shown in the following
example.
Field Description
Group Address Lists the multicast address for the IGMP group.
Interface Lists the interface type, slot and port number.
Mode Displays the IGMP version used.
Uptime Displays the amount of time the group has been operational.
Expires Displays the amount of time until the entry expires.
Last Reporter Displays the IP address of the last host to be a member of the
IGMP group.
Member Ports Indicates the port channel. If the port channel is VLT, an asterisk
(*) after the port channel number indicates the port channel is
locally down and that a remote VLT port is up.
Example
Dell# show ip igmp snooping groups
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Mode Uptime Expires
Last Reporter
225.1.1.1 Vlan 10 IGMPv2-Compat 00:00:07 00:02:09
1.1.1.2
Internet Group Management Protocol (IGMP) 848