Users Guide

Parameters
count number Enter the number of times the RPMs can automatically failover
within the period defined in the period parameter. The range is
from 2 to 10. The default is 3.
period minutes Enter a duration in which to allow a number of automatic
failovers (limited to the number defined in the count parameter).
The range is from 5 to 9000 minutes. The default is 60 minutes.
Default
• Count: 3
• Period: 60 minutes
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series
Usage Information
If you disable auto failover, enter the redundancy auto-failover-limit (without
any parameters) to set auto failover to the default parameters (Count 3, Period 60
minutes). To view the redundancy status, use the show redundancy command.
When you change one or both of the optional parameters, Dell Networking OS checks
that the interval between auto failovers is more than five (5) minutes. If the interval is
less, Dell Networking OS returns a configuration error message.
High Availability (HA) 806