Users Guide

Usage Information
Fixed registration prevents an interface, configured using the command line, to belong
to a VLAN (static configuration) from being unconfigured when it receives a Leave
message. Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port’s membership in the VLAN
depends on GVRP. The interface becomes a member of a VLAN after learning about
the VLAN through GVRP. If the VLAN is removed from the port that sends GVRP
advertisements to this device, the port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when
you do not want the interface.
Related
Commands
• show gvrp — display the GVRP configuration including the registration.
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
GARP VLAN Registration (GVRP) 796