Users Guide

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

• For a port channel interface, enter the keywords port-

channel

then a number.

control-vlan vlan-

Enter the keyword control-vlan then the VLAN ID. The range

is from 1 to 4094.

Defaults None

Command Modes CONFIGURATION (conf-frrp)

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series.

7.4.1.0 Introduced.

Usage Information This command causes the Ring Manager to take ownership of the two ports after IFM

validates the configuration. Ownership is relinquished for a port only when the interface

does not play a part in any control VLAN, that is, the interface does not belong to any

ring.

Commands

• show frrp — display the Resilient Ring Protocol configuration information.

Force10 Resilient Ring Protocol (FRRP) 780