Users Guide

clear frrp
Clear the FRRP statistics counters.
Syntax
clear frrp [ring-id]
Parameters
ring-id (Optional) Enter the ring identification number. The range is
from 1 to 255.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.5.1.0 Introduced.
Usage Information Executing this command without the optional ring-id command clears the statistics
counters on all the available rings. Dell Networking OS requires a command line
confirmation before the command executes. This command clears the following
counters:
• hello Rx and Tx counters
Force10 Resilient Ring Protocol (FRRP) 775