Users Guide

fsck flash
Checks the flash file system for errors.
Syntax
fsck {flash: | usbflash:}
Parameters
flash:
For a directory on the internal Flash, enter flash:// directory
name.
usbflash:
For a directory on the external USB flash, enter usbflash://
directory name.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.1(0.0) Introduced on S4810 and Z9000.
8.3.19.0 Introduced on S4820T.
Usage Information Include the colon (:) when entering this command. This command checks the specified
flash memory for errors. If errors are found, the command recommends that you
format the flash.
CAUTION: If you elect to format the flash, all files – including the startup
configuration file – are lost. If you do decide to format the specified flash,
consider saving the running configuration as the startup configuration after
formatting the flash (use the write memory command or copy running-
config startup-config command).
File Management 77