Users Guide

debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
Syntax
debug fip-snooping rx packet-type [all | discovery | ns | virtual-
link-instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on
which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode solicitation.
• ns — Enter the keyword ns to enable debugging of the
name-server packets.
• virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging on
FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-
discovery to enable debugging on VLAN requests and
notifications.
interface Enter the following keywords and slot/port[/subport] or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
FIP Snooping 759