Users Guide

• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
-l username (OPTIONAL) Enter the keyword —l then the user name used in
this SSH session. The default is the user name of the user
associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2
clients only.):
Without the FIPS mode enabled:
• hmac-shal-96: Force ssh to use the hmac-sha1–96
HMAC algorithm.
• hmac-sha1: Force ssh to use the hmac-sha1 HMAC
algorithm.
• hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC
algorithm.
• hmac-md5: Force ssh to use the hmac-md5 HMAC
algorithm.
With the FIPS mode enabled:
• hmac-sha2-256: Force ssh to use the hmac-sha2-256
HMAC algorithm.
• hmac-shal-96: Force ssh to use the hmac-sha1–96
HMAC algorithm.
• hmac-sha1: Force ssh to use the hmac-sha1 HMAC
algorithm.
• hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC
algorithm.
• hmac-md5: Force ssh to use the hmac-md5 HMAC
algorithm.
-p port-number (OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65535.
-v {1|2} (OPTIONAL) Enter the keyword —v then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not
display in the output.
Defaults See Parameters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
FIPS Cryptography 753