Users Guide

stack-unit
number
(OPTIONAL) : Enter the keyword stack-unit then the stack-unit
slot number.
linecard number
(OPTIONAL) : Enter the keyword linecard then the linecard slot
number.
port-set number
(OPTIONAL) Enter the keyword port-set then the port-set slot
number.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.9(0.0) Added flow-based-hashing support for hashing on ECMP for
S4820T, S6000, S4048 and Z9500.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Added the nh-ecmp option.
7.7.1.1 Added the nh-ecmp option.
Usage Information To ensure that CRC is not used for LAG, set the default hash-algorithm method on E-
Series systems. For example,hash-algorithm ecmp xor lag checksum nh-ecmp
checksum.
The hash value calculated with the hash-algorithm command is unique to the entire
unit. The hash algorithm command with the stack-unit option changes the hash for a
particular stack-unit by applying the mask specified in the IPSA and IPDA fields.
Equal Cost Multi-Path (ECMP) 739