Users Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a LAG interface, enter the keywords port-channel
then the slot/port information.
Defaults Off
Command Modes
• CONFIGURATION
• CONFIGURATION ECMP-GROUP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
Usage Information
Using CONFIGURATION mode, create an ECMP group ID. You can then assign
interfaces to the ECMP group using CONFIGURATION ECMP-GROUP mode. You can
also enable on the port-channel configuration using the CONFIGURATION ECMP-
GROUP command mode.
Equal Cost Multi-Path (ECMP) 736