Users Guide

name Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to configure a domain name corresponding to a VRF. This domain is
appended to the in complete DNS requests corresponding to the specified VRF.
Example
Dell(conf)# ip domain-name vrf jay dell.com
ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS
requests corresponding to a specific VRF.
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf vrf-
name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF
to add a domain name to the DNS list corresponding to that
VRF.
name Enter the name of the domain to be appended to the DNS list
corresponding to the VRF.
Defaults None
Command Modes EXEC
Dynamic Host Configuration Protocol (DHCP) 731