Users Guide

Parameters
interface interface
Enter any of the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
queue
Enter the keyword queue followed by all for displaying details of
all queues, ucast queue-id or all for displaying Unicast queue
details, and
mcast queue-id or all for displaying Multicast
queue details.
priority-group Enter the keyword priority-group followed by id for specific
priority-group or keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
Z9000, Z9500.
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/
multicast buffer usage on per-port per-queue basis. For CPU port, counters for queues
0 to 11 displays and there is no differentiation between unicast and multicast queues.
Example displaying
egress queue-level
snapshot for both
unicast and
multicast packets
for the specific
interface
Dell# show hardware buffer-stats-snapshot resource interface
fortyGigE 1/1 queue all
Unit 1 unit: 0 port: 1 (interface Fo 1/49)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
UCAST 0 0
UCAST 1 0
UCAST 2 0
UCAST 3 0
UCAST 4 0
UCAST 5 0
Debugging and Diagnostics 687