Users Guide

the data plane statistics, which shows the High Gig (Higig) port
raw input/output counter statistics to which the stacking
module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display
the counters of the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display
the Management plane input/output counter statistics of the
pseudo party bus interface.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics to
display the sata interface error counter statistics.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the
selected stack member. Enter the optional keyword unit
unit-number
to display the internal drop counters of the
specified port pipe.
fpga register Enter the keyword to display the register value of the fpga
register.
unit unit-number
{counters | details
| port-stats [detail]
| register}
Enter the keyword unit then a number and then enter one of
the keywords to troubleshoot errors on the selected port-pipe
and to give status on why a port is not coming up to register
level.
TI monitor Enter the unit keyword to show information regarding the TI
register.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Replaced the keyword port with interface.
9.7(0.0) Introduced on the S6000-ON.
Debugging and Diagnostics 668