Users Guide

Field Description
shared threshold
weight
Weightage of the priorities on the shared buffer size in the
system.
service-class buffer shared-threshold-
weight
Create a service class and associate the threshold weight of the shared buffer with each of the queues per
port in the egress direction.
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0 number]
|| [queue1 number] || [queue2 number] || [queue3 number] ||
[queue4 number] || [queue5 number] || [queue6 number] || [queue7
number]}
Parameters
buffer Define the shared buffer settings
shared-threshold-
weight
Specify the weight of a queue for the shared buffer space
queue 0 to queue
7
To apply the shared-threshold weight, specify the queue
number
number Enter a weight for the queue on the shared buffer as a number
in the range of 1 to 11.
Default The default threshold weight on the shared buffer for each queue is 9. Therefore, each
queue can consume up to 66.67 percent of available shared buffer by default.
Command Modes INTERFACE mode
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.9(0.0) Introduced on the Z9500, S4810, S4820T, S5000, and S4048–
ON.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000.
Usage Information
You can configure all the data queues. You can configure queues 0-7.
Data Center Bridging (DCB) 653