Users Guide

priority value buffer-size size pause-threshold threshold-value
resume-offset threshold-value shared-threshold-weight size
Dell(conf-dcb-buffer-thr)#priority 0 buffer-size 52 pause-
threshold 16 resume-offset 10 shared-threshold-weight 7
priority
Configure the priority for the PFC threshold to be allocated to the buffer space parameters.
Syntax
priority value buffer-size size pause-threshold threshold-value
resume-offset threshold-value shared-threshold-weight size
Parameters
priority Specify the priority of the queue for which the buffer space
settings apply
value Enter a number in the range of 0 to 7 to denote the priority to be
allocated to the dynamic buffer control mechanism
buffer-size Ingress buffer size
size Size of the ingress buffer in KB. Enter a number in the range of 0
to 7787. The default is 45 KB.
pause-threshold Buffer limit for pause frames to be sent
threshold-value Buffer limit at which the port sends the pause to peer in KB.
Enter a number in the range of 0 to 7787. The default is 10 KB.
resume-offset Buffer offset limit for resuming in KB
threshold-value Buffer offset limit at which the port resumes the peer in KB.
Enter a number in the range of 1 to 7787. The default is 10 KB.
shared-threshold-
weight
Buffer shared threshold weight
size Weightage of the priorities on the shared buffer size in the
system. Enter a number in the range of 0 to 9. The default
shared threshold weight is 10.
Command Modes DCB-BUFFER-THRESHOLD mode
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
Data Center Bridging (DCB) 644