Users Guide

Example
Dell(conf)#dcb pfc-shared-buffer-size 800
dcb-buffer-threshold
Configure the profile name for the DCB buffer threshold.
Syntax
dcb buffer—threshold
Parameters
profile-name Enter the name of the profile, which can be a string of up to 32
characters in length.
Default None
Command Modes CONFIGURATION mode
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.6(0.0) Introduced on the S5000.
9.3(0.0) Introduced on the S4810, S4820T, and S6000.
Usage Information When you enter the profile name, you enter the DCB buffer threshold configuration
mode. You can specify the shared buffer threshold limit, the ingress buffer size, buffer
limit for pausing the acceptance of packets, and the buffer offset limit for resuming the
acceptance of received packets.
Example
Dell(conf)#dcb buffer—threshold test
Example of
commands in dcb
buffer—
threshold mode
qos-policy-buffer queue queue-num pause no-drop queue buffer-size
size pause-threshold threshold-value resume-offset threshold-value
shared-threshold-weight size
Dell(conf)# qos-policy-buffer test
Dell(conf-qos-policy-buffer)#queue 0 pause no-drop buffer-size
128000 pause-threshold 103360 resume-threshold 83520
Dell(conf-qos-policy-buffer)# queue 4 pause no-drop buffer-size
128000 pause-threshold 103360 resume-threshold 83520
Data Center Bridging (DCB) 643