Users Guide

0 Input Conf TLV Pkts, 0 Output Conf TLV Pkts, 0 Error Conf TLV
Pkts
0 Input Traffic Class TLV Pkts, 0 Output Traffic Class TLV Pkts,
0 Error Traffic Class
TLV
Pkts
show qos priority-groups
Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID of each
group.
Syntax
show qos priority-groups
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Example
(Summary)
Dell# show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
show stack-unit stack-ports ets details
Displays the ETS configuration applied to egress traffic on stacked ports, including ETS Operational mode on
each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and scheduler type.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-number}
ets details
Parameters
stack-unit Enter the stack unit identification.
port-number Enter the port number.
Command Modes EXEC Privilege
Data Center Bridging (DCB) 623