Users Guide

ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
peer-group-name (OPTIONAL) Enter the name of a peer group to view information
about that peer group only.
detail (OPTIONAL) Enter the keyword detail to view detailed status
information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Added the add-path option to the S4810. Output on the S4810
shows the ADDPATH parameters.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
The following describes the show ip bgp peer-group command shown in the
following example.
Border Gateway Protocol 555