Users Guide

Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S5000, and S6000.
Usage Information Activate the VRF application on a device using the feature vrf command in
CONFIGURATION mode. The no feature vrf command is not supported on any
platform.
show feature
Verify the status of software applications, such as VRF, that are activated and running on a device.
Syntax
show feature
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.4(0.0) Introduced on the S4810, S4820T, and S6000.
Usage Information You can activate VRF application on a device by using the feature vrf command in
CONFIGURATION mode. The no feature vrf command is not supported on any of
the platforms.
Example
Dell# show feature
Feature State
------------------------------
CLI Basics 54