Users Guide

Defaults N/A

Command Modes ROUTER MAP

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S-Series.

Usage Information

A new policy command is introduced in order to attach the Link Bandwidth extended

community only to the prefixes that are received from a neighbor that satisfy the

desired conditions. This command is relevant for both inbound as well as outbound

policy handling (for received prefixes). Also, there is no change to the set of supported

conditions or filters.

During configuration, the bandwidth is specified in Mbps, not in bytes/second. While

creating the actual LB extended community, the system will attach the AS number and

encode the bandwidth in floating point format.

show capture bgp-pdu neighbor

Display BGP packet capture information for an IPv4 address on the system.

Syntax

show capture bgp-pdu neighbor ipv4-address

Parameters

ipv4-address Enter the IPv4 address (in dotted decimal format) of the BGP

address to display packet information for that address.

Command Modes EXEC Privilege