Users Guide

peer-group-name Enter the name of the peer group to disable all routers within
the peer group.
weight Enter a number as the weight. The range is from 0 to 65535. The
default is 0.
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
In the Dell Networking OS best path selection process, the path with the highest weight
value is preferred.
NOTE: In the Dell Networking OS best-path selection process, the path with the
highest weight value is preferred.
If you configure the set weight command in a route map applied to this neighbor,
the weight set in that command overrides the weight set in the neighbor weight
command.
Related
Commands
• set weight — assign a weight to all paths meeting the route map criteria.
Border Gateway Protocol 514