Users Guide

Version Description
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
If you configure the set next-hop command in ROUTE-MAP mode, the
configuration takes precedence over the neighbor next-hop-self command.
If you do not use the all keyword, the next hop of only eBGP-learned routes is
updated by the route reflector. If you use the all keyword, the next hop of both eBGP-
and iBGP-learned routes are updated by the route reflector.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
neighbor {ip-address | peer-group-name} password [encryption-type]
password
To delete a password, use the no neighbor {ip-address | peer-group-name}
password command.
Parameters
ip-address Enter the IP address of the router to be included in the peer
group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password
entered. 7 means that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character
of the password must be a letter.
You cannot use spaces in the password.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Border Gateway Protocol 496