Users Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information If you configure the neighbor maximum-prefix command and the neighbor
receives more prefixes than the neighbor maximum-prefix command configuration
allows, the neighbor goes down and the
show ip bgp summary command displays
(prfxd) in the State/PfxRcd column for that neighbor. The neighbor remains down until
you enter the clear ip bgp command for the neighbor or the peer group to which
the neighbor belongs or you enter the
neighbor shutdown and neighbor no
shutdown commands.
Related
Commands
• show ip bgp summary — display the current BGP configuration.
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor.
Syntax
neighbor {ip-address | peer-group-name} next-hop-self [all]
To return to the default setting, use the no neighbor {ip-address | peer-
group-name} next-hop-self [all] command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
all Specifies that the route reflector is the next hop for both iBGP
and eBGP-learned routes.
Defaults Disabled.
Command Modes ROUTER BGP
Command History
Version Description
9.10(0.0) Introduced the all keyword on the S4810, S4820, S4048–ON,
S3048–ON, S3100 series, S6010–ON, S4040T-ON, S5000,
S6000, S6000–ON, S6100–ON, Z9100–ON, and Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.7.0 Introduced on the S4810.
Border Gateway Protocol 495