Users Guide

keepalives Enter the keyword keepalives to view BGP keepalives.
notifications Enter the keyword notifications to view BGP notifications.
soft-
reconfiguration
Enter the keywords soft-reconfiguration to view only
information on inbound BGP soft reconfiguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and
out parameters in the debugging command. The in and out parameters cancel each
other; for example, if you enter the
debug ip bgp in command and then enter the
debug ip bgp out command, you do not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for
BGP.
Related
Commands
• debug ip bgp events — view information about BGP events.
• debug ip bgp keepalives — view information about BGP keepalives.
• debug ip bgp notifications — view information about BGP notifications.
• debug ip bgp updates — view information about BGP updates.
• show debugging — view enabled debugging operations.
Border Gateway Protocol 471