Users Guide

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
In Non-Deterministic mode, paths are compared in the order in which they arrive. This
method can lead to Dell Networking OS choosing different best paths from a set of
paths, depending on the order in which they are received from the neighbors because
MED may or may not get compared between adjacent paths. In Deterministic mode (no
bgp non-deterministic-med), Dell Networking OS compares MED between
adjacent paths within an AS group because all paths in the AS group are from the same
AS.
When you change the path selection from Deterministic to Non-Deterministic, the path
selection for the existing paths remains Deterministic until you enter the clear ip
bgp
command to clear existing paths.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax
bgp recursive-bgp-next-hop
To disable next-hop resolution, use the no bgp recursive-bgp-next-hop
command.
Defaults Enabled
Command Modes ROUTER BGP
Border Gateway Protocol 459