Users Guide

Parameters
acl
(OPTIONAL) Enter the keyword acl to display Layer 2 and Layer
3 ACL CAM usage.
router
(OPTIONAL) Enter the keyword router to display Layer 3 CAM
usage.
switch
(OPTIONAL) Enter the keyword switch to display Layer 2 CAM
usage.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information The following regions must be provided in the show cam-usage output:
• L3AclCam
• L2AclCam
• V6AclCam
The following table describes the output fields of this show command:
Field Description
StackUnit The Stack unit number
Portpipe The hardware path that packets follow through a system for ACL
optimization
CAM Partition Type of area in the CAM block that is used for ACL VLAN groups
Total CAM Total amount of space in the CAM block
Used CAM Amount of CAM space that is currently in use
Available CAM Amount of CAM space that is free and remaining to be allocated
for ACLs
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 409