Users Guide

mask Enter the mask for the UDF in Hex, up to 24 bytes.
Defaults None
Command Modes CONFIGURATION-UDF-Qualifier-Value Profile
Example
Dell(conf-udf-tcam-qual-val)#udf-id 1 aa ff
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0) Introduced on the S6000, Z9500, and S4048-ON.
Related
Commands
udf-qualifier-value — creates a UDF qualifier value.
udf-tcam — creates a context for UDF TCAM.
show config — displays the current UDF -Qualifier-Value Profile configuration.
udf-qualifier-value
Create a UDF qualifier value to assign values for all UDF IDs.
Syntax
udf-qualifier-value name
To return to the default settings, use the no udf-qualifier-value name
command.
Parameters
name Enter the UDF qualifier value profile name, up to 64 characters.
Defaults None
Command Modes CONFIGURATION-UDF TCAM
Example
Dell(conf-udf-tcam)# udf-qualifier-value ipnip_val1
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Access Control Lists (ACL) 345