Users Guide

Example

Dell(config-ext-nacl)#deny ip any any udf-pkt-format ipinip udf-

qualifier-value ipnip_val1

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(0.0) Introduced on the S6000, Z9500, and S4048-ON.

Commands

ip access-list standard — configures a standard ACL.

ip access-list extended — creates an extended ACL.

feature udf-acl

Enable udf-acl feature on a switch.

Syntax

feature udf-acl

To disable the udf-acl feature, use the no feature udf-acl command.

Defaults Disabled

Command Modes CONFIGURATION