Users Guide

set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference
command.
Parameters
value Enter a number as the LOCAL_PREF attribute value. The range is
from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The set local-preference command changes the LOCAL_PREF attribute for
routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use
the bgp default local-preference command.
Access Control Lists (ACL) 326