Users Guide

additive (OPTIONAL) Enter the keyword additive to add the
communities to already existing communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
• match community — redistribute routes that match the COMMUNITY attribute.
• show ip bgp community — display BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
To remove a set level condition, use the no set level {backbone | level-1 |
level-1-2 | level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes to
the OSPF backbone area (area 0.0.0.0).
Access Control Lists (ACL) 324