Users Guide

ip access-list standard test

remark 5 Permit traffic from XYZ Inc.

seq 5 permit 1.1.1.0/24

remark 10 Deny rest of the traffic

seq 10 deny any

Dell(config-std-nacl)#

Commands

• show config — display the current ACL configuration.

show config

Display the current ACL configuration.

Syntax

show config

Command Modes

• CONFIGURATION-STANDARD-ACCESS-LIST

• CONFIGURATION-EXTENDED-ACCESS-LIST

• CONFIGURATION-MAC ACCESS LIST-STANDARD

• CONFIGURATION-MAC ACCESS LIST-EXTENDED

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.11.1 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

Access Control Lists (ACL) 237