Users Guide

• deny arp (for Extended MAC ACLs)
• deny icmp (for Extended IP ACLs)
• deny ether-type (for Extended MAC ACLs)
• deny (for Standard MAC ACLs)
• deny (for Extended MAC ACLs)
• permit (for Standard IP ACLs)
• permit arp (for Extended MAC ACLs)
• permit ether-type (for Extended MAC ACLs)
• permit icmp (for Extended IP ACLs)
• permit udp (for Extended IP ACLs)
• permit (for Extended IP ACLs)
• permit (for Standard MAC ACLs)
• seq (for Standard MAC ACLs)
• permit tcp (for Extended IP ACLs)
• seq arp (for Extended MAC ACLs)
• seq ether-type (for Extended MAC ACLs)
• seq (for IP ACLs)
• seq (for IPv6 ACLs)
• permit udp (for IPv6 ACLs)
• permit tcp (for IPv6 ACLs)
• permit icmp (for IPv6 ACLs)
• permit (for IPv6 ACLs)
• deny udp (for IPv6 ACLs)
• deny tcp (for IPv6 ACLs)
• deny icmp (for Extended IPv6 ACLs)
• deny (for IPv6 ACLs)
Commands Common to all ACL Types
The following commands are available within each ACL mode and do not have mode-specific options. Some
commands in this chapter may use similar names, but require different options to support the different ACL
types (for example, the deny and permit commands).
remark
Enter a description for an ACL entry.
Syntax
remark [remark-number] [description]
Parameters
remark-number Enter the remark number. The range is from 0 to 65535 for MAC
ACL and 0 to 4294967290 for IP ACL.
Access Control Lists (ACL) 235