Users Guide

Parameters
interface Enter one of the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
mac-address (Optional) MAC address of a supplicant.
Defaults None
Command Modes
• EXEC
• EXEC privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.2.1 Added the mac-address option on the C-Series and S-Series.
7.6.1.0 Introduced on the C-Series, E-Series, and S-Series.
Usage Information
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X
configuration details (Port Authentication status, Untagged VLAN ID, Authentication
PAE state, and Backend state) display for each supplicant, as shown in the following
example.
Example
Dell# show dot1x interface tengigabitethernet 1/32
802.1x information on Te 1/32:
802.1X 231