Users Guide

vrf vrf-name (OPTIONAL) Enter the name of a VRF instance to clear the
counters of all IPv6 VRRP groups in the specified VRF. The
maximum is 32 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.9(0.0) Added support to clear the interface configurations
corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.4.1.0 Introduced on E-Series, C-Series, and S-Series. Support was
added for IPv6 VRRP groups in nondefault VRF instances.
8.3.2.0 Introduced on the E-Series.
Usage Information
NOTE: You can also clear the port configurations corresponding to a range of
ports. For Open Networking (ON) platforms, the notation for specifying the port
range in the command is different from how you specify the port range in non-
ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-
range. For example, if you want to clear the port configurations
corresponding to all ports between 1 and 4, specify the port range as
clear
counters interfaces interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/
[subport] - slot/port/[subport]. For example, if you want to clear
the port configurations corresponding to all ports between 1 and 4, specify
the port range as clear counters interfaces interface-type
1/1/1 - 1/1/4.
Virtual Router Redundancy Protocol (VRRP) 2124