Users Guide

show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No
Active VRRP group.
Syntax
show vrrp [vrrp-id][brief][interface type][ipv6][interface type][vrf
vrf-name]
Parameters
vrrp-id (OPTIONAL) Enter the virtual router identifier for the VRRP group
to view only that group. The range is from 1 to 255.
brief (OPTIONAL) Enter the keyword brief to view a table of
information about the VRRP groups.
interface type (OPTIONAL) Enter the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan, and then the
VLAN ID. The VLAN ID range is from 1 to 4094.
ipv6 (OPTIONAL) Enter the keyword ipv6 to view only VRRP IPv6
groups.
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF
to view active VRRP groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Virtual Router Redundancy Protocol (VRRP) 2113