Users Guide

• dot1x authentication (Configuration)
• dot1x authentication (Interface)
• dot1x guest-vlan
• dot1x host-mode
• dot1x mac-auth-bypass
• dot1x max-eap-req
• dot1x max-supplicants
• dot1x port-control
• dot1x quiet-period
• dot1x reauthentication
• dot1x reauth-max
• dot1x server-timeout
• dot1x supplicant-timeout
• dot1x tx-period
• show dot1x cos-mapping interface
• show dot1x interface
debug dot1x
Display 802.1X debugging information.
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu]
[interface interface]
Parameters
all Enable all debugs in dot1x.
auth-pae-fsm Enable Authentication PAE FSM debugs in dot1x.
backend-fsm Enable Backend Auth FSM debugs in dot1x.
eapol-pdu Enable EAPOL frame trace in dot1x.
interface interface Restricts the debugging information to an interface. The
interface option is available only when the interface is either
operationally up or dot1x related interface configuration exists
before enabling debugging for that interface.
Defaults Disabled
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
802.1X 211