Users Guide

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
controller
Configures controller for the VXLAN instance on the platform.
Syntax
controller controller ID ip address port port-number tcp|ptcp|
pssl|ssl
Parameters
controller ID Enter the controller ID.
ip address Enter the IP address of the controller.
port port-number (OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is 6632.
tcp (OPTIONAL) Enter the keyword tcp to configure tcp connection
to controller.
ptcp (OPTIONAL) Enter the keyword ptcp to configure passive tcp
connection to controller.
pssl (OPTIONAL) Enter the keyword pssl to configure passive ssl
connection to controller.
ssl (OPTIONAL) Enter the keyword ssl to configure ssl connection
to controller (Default).
Defaults Disabled
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Virtual Extensible LAN (VXLAN) 2092