Users Guide

Parameters
secure Enter the keyword secure to delete all its database and
hardware flows/resources, when the VTEP loses connectivity
with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
To delete vxlan-instance from the system, use no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Virtual Extensible LAN (VXLAN) 2089