Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

2061

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.0) Introduced on the M I/O Aggregator. This command is

supported in Programmable-Mux (PMUX) mode only.

9.2(0.2) Introduced on the Z9000, S4810, and S4820T.

9.0.2.0 Introduced on the S6000.

peer-link port-channel

Configure the specified port channel as the chassis interconnect trunk between VLT peers in the domain.

Syntax

peer-link port-channel port-channel-number {peer-down-vlan vlan

id}

Parameters

port-channel-

number

Enter the port-channel number that acts as the interconnect

trunk. The range is from 1 to 128.

peer-down-vlan

vlan id

Enter the keywords peer-down-vlan then a VLAN ID to

configure the VLAN that the VLT peer link uses when the VLT

peer is down.

Defaults Not configured.

Command Modes VLT DOMAIN

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.