Users Guide

This configuration is applicable only for an LLDP proxy gateway. A typical use example
is a square VLT topology with single link connecting to the remote peers.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Displays the VLT proxy gateway configuration.
S4048–ON
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Enter the keyword lldp to display details about the LLDP VLT
proxy gateway configuration.
static Enter the keyword static to display details about the static VLT
proxy gateway configuration.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
The proxy-gateway feature may go operationally down for any of the following
reasons:
• LLDP is globally disabled.
• LDP is disabled per port.
• VLT port-channel is down.
VLT Proxy Gateway 2058