Users Guide

Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate
with the static VLT proxy gateway and exclude a VLAN, or a range of VLANs, from proxy
routing.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
Dell(conf-vlt-domain-proxy-gw-static)#
peer-domain-link port-channel
exclude-vlan
Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or
configure the VLANs you want to exclude from VLT proxy gateway.
S4048–ON
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-
vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel.
interface-
identifier
Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy
gateway. The value can be a single VLAN ID, comma-separated
VLAN IDs, a range of VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
VLT Proxy Gateway 2055