Users Guide

Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway static
Dell(conf-vlt-domain)#
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
S4048–ON
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the
remote VLT domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn
format.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The
VLANs are excluded from doing proxy gateway. The value can
be a single VLAN ID, comma-separated VLAN IDs, a range of
VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
VLT Proxy Gateway 2054