Users Guide

Version Description
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The configuration is cached and sent to LLDP only in one of the following conditions:
1 The port-channel connecting the two VLT domains, across the DC, is a VLT LAG.
2 The protocol lldp command is globally enabled.
3 The proxy-gateway LLDP configuration is applied.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway lldp
Dell(conf-vlt-domain)#
proxy-gateway static
Enables the proxy-gateway feature using static configurations.
S4048–ON
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When you add a proxy-gateway static configuration, the setting is saved in the Layer 2
module. When you remove the static proxy gateway configuration, each proxy-
gateway static MAC configured is deleted from the Layer 2 module.
VLT Proxy Gateway 2053