Users Guide

show ethernet cfm port-statistics
Display CFM statistics by port.
Syntax
show ethernet cfm port-statistics [interface type slot/port[/
subport]]
Parameters
interface type Enter the keyword interface then the interface type.
slot/port[/subport] Enter the slot and port numbers for the port. Enter the subport
number if a 40G port is fanned-out into 10G ports.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm port-statistics interface
tengigabitethernet 1/5
Port statistics for port: Te 1/5
==================================
RX Statistics
=============
Total CFM Pkts 75394 CCM Pkts 75394
LBM Pkts 0 LTM Pkts 0
LBR Pkts 0 LTR Pkts 0
Bad CFM Pkts 0 CFM Pkts Discarded 0
CFM Pkts forwarded 102417
TX Statistics
=============
Total CFM Pkts 10303 CCM Pkts 0
LBM Pkts 0 LTM Pkts 3
LBR Pkts 0 LTR Pkts 0
802.1ag 205