Users Guide

warning-
threshold
The warning threshold value is a percentage of the limit value.
When the number of routes reaches the specified percentage of
the limit, a warning message appears. The valid range is from 1
to 100.
After the limit is reached, additional dynamic routes are not
allowed.
warning-only When you use the warning-only option, when the maximum
number of dynamic routes reaches the limit, a warning message
appears.
After the limit is reached, additional dynamic routes are still
allowed.
Defaults No limit is set on the maximum number of dynamic routes for a VRF.
Command Modes
CONFIGURATION-VRF
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited space
that extends to the maximum number of entries allowed for the system.
show ip vrf
Displays information corresponding to the VRFs that you configure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display
information corresponding to that VRF.
Virtual Routing and Forwarding (VRF) 2049