Users Guide

The export-target and import-target options support only the match protocol and

match prefix-list options. Other options that you configure in the route-maps are

ignored.

Commands

• ipv6 route-import – imports IPv6 routes from another VRF.

redistribute

Redistributes leaked or exported routes corresponding to specific protocols.

Syntax

redistribute {imported-bgp | import-ospf | import-isis}

Parameters

imported-bgp Enter the keywords imported-bgp to redistribute leaked routes

that are learned using the BGP protocol.

imported-ospf Enter the keywords imported-ospf to redistribute leaked

routes that are learned using the OSPF protocol.

imported-isis Enter the keywords imported-isis to redistribute leaked

routes that are learned using the ISIS protocol.

route-map Enter the name of the route-map to specify the filtering criteria

for imported routes.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,

and Z9500.

Commands

• ip route-import — import routes from another VRF.

Virtual Routing and Forwarding (VRF) 2047