Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
and Z9500.
Usage Information To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP
client uses the VRF name that you specify to reach the HTTP server. If you do not
specify a VRF name, the HTTP client uses the default VRF.
description
Specify a name for a customer VRF.
Syntax
description string
To delete the descriptive name for a customer VRF, use the no description string
command.
Parameters
string Enter a descriptive name for the VRF.
Defaults None.
Command Modes VRF MODE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series.
Virtual Routing and Forwarding (VRF) 2039