Users Guide

Defaults Available by default for management VRF. For creating other customer VRFs, enable the
feature vrf option in Configuration mode.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON and Z9500.
9.4(0.0) Introduced on the S4810 and S4820T.
Usage Information
You cannot use the keyword default as a VRF name as this name indicates a special
VRF.
To create a management VRF, use the keyword management.
The VRF ID is optional.
ip http vrf
Configure an HTTP client with a VRF used to connect to the HTTP server.
Syntax
ip http vrf {management | vrf-name}
To undo the HTTP client configuration, use the ip http vrf command.
Parameters
management Enter the keyword management for configuring the
management VRF that uses an HTTP client.
vrf-name Enter a VRF name that the HTTP client uses. If you do not
specify a VRF name, the HTTP client uses the default VRF.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Virtual Routing and Forwarding (VRF) 2038