Users Guide

Number Resulting TPID

1 0x0001

10 0x0010

81 0x0081

8100 0x8100

Commands

• portmode hybrid — sets a port (physical ports only) to accept both tagged and

untagged frames. A port configured this way is identified as a hybrid port in report

displays.

• vlan-stack trunk — specifies a Layer 2 port or port channel as a trunk port to the

Stackable VLAN network.

vlan-stack trunk

Specify a Layer 2 port or port channel as a trunk port to the stackable VLAN network.

Syntax

vlan-stack trunk

To remove a trunk port designation from the selected interface, use the no vlan-

stack trunk command.

Defaults Not configured.

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

VLAN Stacking 2034