Users Guide

stack-group-id Enter the stack group ID. The range is from 0 to 16.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.10.2 Introduced on the S4810.

Usage Information

WARNING: The following message displays to confirm the command: All

non-default configurations on the related member ports ports

(<ports listed here>) will be removed. Do you want to continue

(y/n)? If you enter “y”, all non-default configurations on any member ports of

the current stack group are removed when you reboot the unit.

vlan-stack access

Specify a Layer 2 port or port channel as an access port to the stackable VLAN network.

Syntax

vlan-stack access

To remove access port designation, use the no vlan-stack access command.

Defaults Not configured.